High-altitude glass wall cleaning process, tools and standards

[China Glass Network] 1. First check the job site and determine the operation plan. Focus on the roof condition, determine whether the hanging basket, hanging plate, hanging basket, hanging plate can be moved on the roof without obstacles; neon lights, signs have no obstacles to work.

2. Install the vehicle. If the window cleaning machine has been installed in the building, check the operation before the operation.

3. Prepare the wiping tool and cleaning agent.

4. The operator carries the hanging basket or hanging plate on the tool. Some tools should be placed on the hanging basket or hanging plate to prevent accidental loss of the hand and injury to the pedestrian. Set a safety fence on the ground or place a safety warning sign.

5. The operation mode is from top to bottom. After each line is wiped, organize the tool, add cleaning agent, move the hanging plate horizontally or the hanging basket, and then continue the next line.

6, wipe the glass method:

1) Check for stains such as sticking on the glass, if any, first remove them with a corresponding aid such as a scraper and solvent.

2) Dip the water applicator into the bucket. After fully inhaling the detergent, gently rub it by hand (not dripping down) and apply it evenly on the glass.

3) When applying, generally roll from top to bottom and move laterally. Each roll should be cross-phase pressed to prevent leakage.

4) Scrape the cleaning agent on the glass with a squeegee. Use a little force during operation. Press the squeegee evenly on the glass, and slowly scrape from top to bottom. After each row, wipe the squeegee with a wet towel. Clean and scrape off a line.

5) Confirm that the wall surface within the working range has been cleaned, and the sliding basket or hanging plate continues to work downward.

6) After all the work is completed, clean up the equipment and tools, evacuate the ground protection rope or warning sign, and wipe the ground water.

Cotton polyester Bended Denim fabric denim shirting fabric cotton Jeans fabric, 1.cotton polyester spandex 2.woven cotton polyester Blended denim fabric denim shirting fabric cotton.

Constructed from a durable blend of cotton twill and polyester blend mens flared jeans, this men's blended slim fit black padded denim jeans cargo denim pants are built to last. Featuring superior comfort of this new style Men's Jeans, these rugged Men'S Cotton Blend Pants are perfect for light - to medium-duty occupations like construction, maintenance and repair, transportation, farming, and warehouse work. And thanks to easy-care features such as wrinkle resistance, a stain repel-and-release finish on our customize Unique Design Men'S Jeans, and a permanent pant crease, these blend pants look as professional as they are durable. 

Professional and comfortable fit with blend mens flared jeans: twill work pants deliver no-quit comfort throughout the work day. A lower rise, comfortable waistband with the Men'S Jeans , and generous cut through the seat and thighs ensure your comfort when wearing this men's cotton blend pants, while wide belt loops accept work belts and men's blended pantsopenings are sized to fit over work boots. Two back welt pockets on the customize unique design men's jeans with button closures hold a wallet and other personal items securely. Rugged, comfortable and well-fitting apparel of our hot products men's jean's cotton pants.




Men's Blended Pants

Men'S Blended Pants,Men'S Cotton Blend Pants,Cheap Men'S Blended Pants,Blend Mens Flared Jeans

Dongguan Zhongtang yu' an Weaving factory , https://www.yuanfabric.com