[China Glass Network] Recently, the headlines of all major news were occupied by President Xi’s visit to the United States. President Xi attended the 2015 World Internet Conference in Seattle, accompanied by Ma Yun, Ma Huateng, Li Yanhong, Liu Qiangdong, etc. A large number of Internet amnesty is enough to show that the state and the government attach importance to the development of the Internet.
The world is evolving with each passing day, and the Internet is accelerating into all walks of life. The Yibo Mall under the Hebei Ruidi Network combines the traditional glass industry with the Internet to truly realize the safe and convenient online trading of glass. However, many of the partners who have settled in Igbo Mall will encounter some small shooting problems when uploading high-quality, beautiful product photos in their stores:
That is to say, when shooting a glass material, it is easy to encounter the phenomenon that the glass product will reflect light. How to shoot the glass product better?
Avoiding surface reflection is a major issue in the photography industry. Glass, like other smooth surfaces, produces reflections when exposed to light. The smoother the surface, the brighter the spot, which shows the smoothness and brightness of the subject's texture. However, if there are too many spots or improper positions, it will have the opposite effect, so shooting the glass is mainly to deal with the spot problem.
In fact, shooting such products as glass is also very simple, set up a tent for glass products, you can light it from the rear. The object was placed on the still life table, and there were two studio lights with softboxes and soft umbrellas on both sides, and only the use of studio lights.
To avoid reflections, you can use a variety of methods:
1. Use a translucent white paper or white gauze to make a tent, and surround the subject. Leave only one hole in the front and let the lens aim at the subject from the aperture.
2. Add a layer of sulfuric acid paper in front of the bulb to soften the light. You can also use a reflective umbrella, or use a white paper to make a reflector, put the light on the reflector, and use reflective shooting.
3, the background should be as simple as possible. The background and the color of the subject should not be too close. When shooting color films, it is not advisable to use too much smoke as the background. Because the background color light will be reflected on the subject, affecting the performance of the subject.
4. Use a polarizer to attenuate or eliminate the reflection. Rotate the polarizer in front of the lens slowly until the reflection is weakened or disappeared from the viewfinder.
5. Use a spray or a soft soap. When shooting, spray the spray on the bright spot and the bright spots can be eliminated. When it is cold, you can also aim at the subject when the shutter is opened, so that the surface is foggy white, which can also eliminate bright spots. Another method is to soften the soap. After the alkali-free soft soap is diluted and thinly coated on the bright spot, the effect of eliminating the spot can also be obtained. Pay attention to the surface of the object and the cleansing of the soap when using it. Do not see any marks on the photo.
Our velour slippers are ideal for the spa and leisure industry due to their lightweight comfort. Available in Open and Closed toe. 100% Cotton.We offer them in perfects fittings and are extreme comfort. These Slippers are manufactured using premium quality fabric, thread and other embellishments. These Products are available at affordable price range. Our entire product range is well-tested on quality parameters before the final delivery.
Velour Slippers,Velvet Slippers,Cotton Velour Slipper,Hotel Cotton Slipper
Yangzhou Lansun Slipper Co.,Ltd , https://www.lansunslipper.com